A bedside alarm with nothing attached to the child's body
StoPee™ Bedwetting alarm
The device consists of two parts: the control unit (bedwetting alarm) and the sensor pad. The sensor pad is placed underneath the sheet (not touching the child’s body). The bedwetting alarm is placed on a chair or a nightstand next to the child’s bed and connected with a thin cable to the pad.
In the case of a nighttime accident, the ultra-sensitive bedwetting alarm is activated at the first hint of wetness. The parent should then come to the child’s room, help them to wake up (in the event that they do not wake up themselves), and send them to the bathroom.
By repeating this ritual every night, we work to condition the child’s reflex system. The child learns to make a subconscious connection between the bedwetting incident, the sound of the alarm (even if they initially didn’t wake by themselves), and the unpleasant experience of waking up in the middle of the night and going to the bathroom.
But the bedwetting alarm itself is not enough to guide the child to complete dryness. Together with the online software monitoring the progress and guiding the patient towards dry nights, TheraPee™ will help your child overcome this most common, yet fixable problem.
How StoPee™ was designed
StoPee™ was designed by Dr. Sagie’s team over a period of three years. Development of the device was based on thirty years of experience with different bedwetting alarms and took into consideration human factors for optimal needs, efficiency, and friendly usage.
StoPee™ has a sensitivity control button that allows you to adjust the desired sensitivity level and avoid false alarms due to humidity and sweat. It responds to the first drop of urine.
The loud speaker is very strong to suit deep-sleeping patients but can be adjusted by volume control. It has ten different types of sounds. The device also has a special tool button to prevent undesired changes in the device’s setting due to accidental pressing of the setting buttons. (Children tend to explore the device by pressing the different buttons. The tool button locks the other buttons.)
The sensor pad is made of soft EVA, with the metal conductor sealed inside by high-frequency welding.
Safety
Nothing is attached to the child's body: the alarm unit sits beside the bed, and the sensor pad goes under the bedsheet, not touching the child's skin. The unit has no radio transmitter.
StoPee™ is CE marked. StoPee is registered with the U.S. FDA (establishment registration no. 3010177964) as an enuresis alarm, exempt from 510(k) premarket notification. FDA registration does not mean FDA approval. See the EMC and safety test reports.
Warranty: device 1 year, sensor pad 3 months.
Key Features
- Comfortable: nothing on the child's body
- Automatic child lock to avoid unintentional changes of bedwetting alarm settings
- 7 degrees of sensitivity level to prevent false alarms
- Volume control
- 10 types of sounds
- Special reset button
- Large sensor pad to detect bedwetting
- Responds to the first drop of urine
- Strong loud speaker; suitable for deep-sleep patients
- No wires attached to a child’s body
- Bedwetting alarm detached from the child’s body (placed on a chair next to the bed)
- No radio transmitter
- Friendly user interface; control panel is easily accessible
- LED indicators for different functions
- Low battery consumption